This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. Consumed Power, Energy Consumption: Manually set the IDE Accessing mode. Then choose the utility or driver and select model name. Pushing the button once will switch the system ON. Precomp The number of Pre-compensation. Voltage Battery These items show the battery voltage used on board.

Uploader: Mulmaran
Date Added: 17 February 2004
File Size: 7.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58624
Price: Free* [*Free Regsitration Required]

Enabled this option to adjust the keystroke repeat rate; Disabled default: The parallel port on your system is a pin, DB 25 connector. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. The speaker is not connected to the audio subsystem and does not receive output from the audio subsystem.

GaiA Windows Driver Downloads

But after you have finished the hardware installation, you have to install an operation system such as windows XP before you are able to install any drivers or utilities. It’s a community-based project which helps to repair anything. A message will confirm that you wish to disable the password. It must be stated that these items should never be altered.


Connector for Printer Error debug Photo of the day: Video Off Method The choices are for determining the manner in which the monitor is blanked. P4 CPU Socket Finally, the device will have 2 x USB2. Sleep and Suspend power management modes are supported.

This manual is a general reference of the first release of this motherboard which is subject to update acor; notice. Swap Acor; Drive If the system has two floppy drives, you can swap the logical drive name assignments. Video 3Digests Video cards: Boot Other Device Allows user to set booting from other devices.

Pushing the button once will switch the system ON. Insert the DDR memory modules into 448p socket at a degree angle then push down vertically to fit onto place. Consumed Power, Energy Consumption: While more details are to come in the review, below are the first photos of Transcend USB 2.

If this function is enabled and someone attempts to write data into this area, BIOS will show a warning message on screen and alarm beep. Quit without saving changes Submenus: Host cycle that hit the aperture range are forwarded to the AGP without any translation.


Weekly News & Update

FDD This connector supports the provided floppy drive ribbon cable. Non-OS2 defaultOS2. You can plug the USB devices directly into this connector. Please note that akdio USB 2. To do this, the non-VGA graphic controller watches for the write access to the VGA palette and registers the snoop data. Click on the “3-D” icon to start 6-channel configuration. Power supply setup is OK. These settings do not provide optional performance.

This chipset manages bus speeds and access to system memory resources, such as DRAM and external cache. IR1 Connector This connector supports the optional wireless transmission and reception infrared module.

CD audio-in connector 9.

Author: admin