The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. Enabled Virus protection is activated. Auto default , Disabled. Overclock Panel contains the these features: Power on the AC.
|Date Added:||3 October 2007|
|File Size:||45.9 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Off defaultOn, Former-Sts. However, if any program writes to this memory area, a system error may result. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information.
Make sure power cable is securely plugged in.
Normal A pin in the keyboard controller controls Gate A Does not support Willamette CPU. Remove AC power line. Power on the AC. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. HDD Power Down When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.
TM2 Bus VID Represents the voltage of the throttled performance state that will be initiated when the on-die sensor gose from not hot to hot. Half-duplex mode permits transmission in one direction only at a time.
Biostar 865GV Micro 478 7.x Free Driver Download (Official)
During Disabled, you cannot use this function. This action will boot-up the system according to FSB of the processor. If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work.
Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Audoo Panel will slide out to left as the following figure. The setup guide will list the software available for your system, click on each software title to launch the installation program. A confirmation message will be displayed before defaults are set.
This audik generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Half defaultFull.
The Setup program allows users to modify the basic system configuration. Each category includes no, one or more than one setup items. Disabled default Virus protection is disabled. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. System only boots from optical drive.
You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Re-install applications and data using backup disks. By SPD defaultManual. You will be prompted with to enter a password.
Drivers For Free – Biostar Intel Socket gv Micro Audio and Sound Drivers
Fast gives faster performance; and slow gives more stable performance. Swap Floppy Drive For systems with two floppy drives, this option allows you to swap logical drive assignments. Suspend Type Select the Suspend Type. System will boo-up to DOS prompt. Insert the bootable disk into floppy drive and press Enter.
Sleep and Suspend power management hiostar are supported.
Power Management This category allows you to select the type or degree of power saving and is directly related to the following modes: