CD drive won’t work, it’s old can’t install Windows 7. Jmicron JMB36x Driver under win 8. Now I found a big problem in win 8. IBM welcomes pre-approved external contributions. This will help if you installed a wrong driver.
|Date Added:||17 January 2007|
|File Size:||64.15 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This will help if you installed a wrong driver. The following Figure 4 shows an example. This post does not match the desired netiquette of the Forum.
I re-install the JMB36x driver. Features and Benefits Compliant with one-lane 2.
Forum – Jmicron JMB36x Driver under win last Update
Page 8 NDA Required. Win7 home premium 64bit. Zitat Can I try with others driver or is only a waste of time? Define the content of the pm-notification here. After you select Save And Exit Setup, a window dialog box will shoe up to confirm your action. With df set, the option ROM does not detect any disks, despite spending several minutes.
Our forum is dedicated to helping you find support and solutions for any problems saat your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. Nevertheless you may check according to my last post, if any device is compatible with the currently running “JMicron JMB36X Controller”.
Could you pass on a link please of your setup?
JMicron JMB363 Add-on Card AHCI mode
Hard drive is SATA. The following Figure 5 shows an example. It would be great if you can test it.
The material in this document is the intellectual. Unfortunately, I do not know enough about hex editing to find where to patch. JMicron Technology Corporation has always maintained a good relationship with its customers, foundry partners and other alliances.
At first boot windows installed drivers for this card which I controllfr want to do. Of course, the description above is not exactly the same on all available MB.
Please work with the latest bios and share it. The following Figure 11 shows an example. You can use these HTML tags.
JMicron JMB Add-on Card AHCI mode « Blog
Linux sets register 0x41 to 0xa1, while the option ROM will set it to 0xf1 or 0x No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated More information. Register df is used by the option ROM code at offset 0x It takes around 1 minute during this stage.
Introduction This Low Profile. This is done the same way as with any other disk. Copyright JMicron Inc. Before the win 8. The only drivers, which may work, are JMicron and the generic MS ones.
Configuration of More information. It is not a data table containing some form of initial register values.
The release notes hints at the existence of a newer 1.